Thursday, March 27, 2014

1985 Miyata 610 1 x 7 Path Racer Overhaul

1985 Miyata 610 Path Racer Overhaul - Bicycle After
I recently started this 1985 Miyata 610.  It belongs to Jose, he found it as it is.  The Miayta 610 will be changed slightly and overhauled.  Technically it is not a path racer being a 1 x 7 but it sure looks like one!

I think this Miyata 610 is really cool in this set up.  It has a Shimano 105 rear derailleur and crank, an old Shimano friction five speed shift lever, chopped handlebars, new Tektro cantilever brake levers and a strange set of wheels.

Jose found some really nice Shimano 105 wheels off of an old Miyata 914 that will replace the wheels.  New leather short handlebar grips will be installed and a general overhaul.

The Miyata 610 is very muddy so the before and after photos are a little extreme, the blue paint has a lot of chips and is dull but should come out nice, I will fill the chips with touch up paint to make the white primer under the blue chips to not stand out.
1985 Miyata 610 Path Racer Overhaul - Bicycle Before

1985 Miyata 610 Path Racer Overhaul - Bicycle Before - Handlebars

1985 Miyata 610 Path Racer Overhaul
Bicycle Before - Stem

1985 Miyata 610 Path Racer Overhaul
Bicycle Before - Front Brake

1985 Miyata 610 Path Racer Overhaul
Bicycle Before - Shift Lever

1985 Miyata 610 Path Racer Overhaul
Bicycle Before - Crank

1985 Miyata 610 Path Racer Overhaul - Bicycle Before - Fender

1985 Miyata 610 Path Racer Overhaul
Bicycle Before - Rear Brake

1985 Miyata 610 Path Racer Overhaul - Bicycle Before
Shimano 105 Rear Derailleur

1985 Miyata 610 Path Racer Overhaul - Bicycle Before
Rear Wheel
I broke the bicycle down tot he frame, the frame was very muddy and the paint is chipped some and dull.  The paint chips show the white primer under the blue, this will need to be filled so the white wont stand out.
The frame polished out pretty nice with a lot of elbow grease, I am happy with the results and really like this blue Miyata used, I have worked on a few before in this color.

1985 Miyata 610 Path Racer Overhaul - Frame Before

1985 Miyata 610 Path Racer Overhaul - Frame Before
Bottom Bracket

1985 Miyata 610 Path Racer Overhaul
Frame Before - Rear Brake Studs

1985 Miyata 610 Path Racer Overhaul
Fork Before

1985 Miyata 610 Path Racer Overhaul - Frame Polished

1985 Miyata 610 Path Racer Overhaul
Fork Polished
I put the headset in the crock pot for a little bit and then polished it, it polished nice.  The bearings where very gritty from the mud so new grease has them turning smooth.

1985 Miyata 610 Path Racer Overhaul - Headset & Handlebars
Before

1985 Miyata 610 Path Racer Overhaul - Headset Polished

1985 Miyata 610 Path Racer Overhaul
Headset Cups Pressed

1985 Miyata 610 Path Racer Overhaul
Headset Complete

1985 Miyata 610 Path Racer Overhaul - Headset Complete
The handlebars where chopped, the cut was pretty rough and crooked and the two sides did not match.  I cut about a 1/16 of an inch of one side to clean up the cut and about a 1/4 of an inch on the other to make them even.  I really like the look of these handlebars, very cool!!

1985 Miyata 610 Path Racer Overhaul - Cutting the Handlebars
with a Jig.
1985 Miyata 610 Path Racer Overhaul - Handlebars Complete
1985 Miyata 610 Path Racer Overhaul - Handlebars - Complete
The Tektro cantilever brakes are pretty new but very dirty and they squeaked because there was rust forming on the brake studs, I do not think they where greased before installation.  The brakes cleaned up nice and a little hand polishing has them look great.

1985 Miyata 610 Path Racer Overhaul - Brakes - Before

1985 Miyata 610 Path Racer Overhaul - Brakes - Exploded

1985 Miyata 610 Path Racer Overhaul - Brakes - Polished

1985 Miyata 610 Path Racer Overhaul - Front Brake - Installed

1985 Miyata 610 Path Racer Overhaul - Rear Brake - Installed
The crank was a little rough and has a paint finish on the arms.  The paint was pretty bad so I polished the paint of the crank arms.  The crank looks great with the crank arms polished to a high sheen.

1985 Miyata 610 Path Racer Overhaul - Crank - Before

1985 Miyata 610 Path Racer Overhaul - Crank - Exploded

1985 Miyata 610 Path Racer Overhaul - Crank - Polished

1985 Miyata 610 Path Racer Overhaul - Crank - Complete

1985 Miyata 610 Path Racer Overhaul
Crank - Installed
The rear derailleur is a Shimano 105, it was muddy and gritty but after a good cleaning and flushing and lubrication it works very smooth.

1985 Miyata 610 Path Racer Overhaul - Shimano 105 Derailleur
Before

1985 Miyata 610 Path Racer Overhaul - Shimano 105 Derailleur
Exploded

1985 Miyata 610 Path Racer Overhaul - Shimano 105 Derailleur
Polished

1985 Miyata 610 Path Racer Overhaul - Shimano 105 Derailleur
Installed
The fenders are okay fenders.  They are plastic but the black finish fits the look good.  The fenders have also been shopped to give them more of a path racer look.

1985 Miyata 610 Path Racer Overhaul - Fenders - Before

1985 Miyata 610 Path Racer Overhaul - Fenders - Installed
For now an older brown Brooks saddle is being installed, it fits the look of the Miyata perfectly and I like the Patina. 

1985 Miyata 610 Path Racer Overhaul
Old Brooks Saddle - Installed

The wheels that where on the Miyata 610 where miss matched, Jose found some Shimano 105 wheels that someone took off of a Miyata 914, they where in perfect shape and will be pretty darn fast.  The old tires where reused, finding a match front tire will be attempted.

1985 Miyata 610 Path Racer Overhaul - New Old Stock
Shimano 105 Wheels from a Miyata 914

1985 Miyata 610 Path Racer Overhaul - Wheels - Complete

The last things to do was install the new leather handlebar grips, they are actually meant to go with twist grip shift levers but they fit perfect on the chopped handlebars.  New brake cables where installed and the bike tuned.  It shift very easy, when the rain stops I will test ride it.

1985 Miyata 610 Path Racer Overhaul - Bicycle Complete
I really like the results of the Miyata 610, I love the look and the simpleness of the 1 x 7 set up. The leather handlebar grips and Brooks saddle really go well with the chopped handlebars.  I think it is a good use of a bicycle that was not original.  I am think of building up a frame I have here with no components for myself.

Cloudy rainy day so final photos are indoors.

1985 Miyata 610 Path Racer Overhaul - Bicycle Complete

1985 Miyata 610 Path Racer Overhaul - Bicycle - Complete

1985 Miyata 610 Path Racer Overhaul - Bicycle Complete
Handlebars

1985 Miyata 610 Path Racer Overhaul - Bicycle Complete
Front Brake

1985 Miyata 610 Path Racer Overhaul - Bicycle Complete
Hanldebars

1985 Miyata 610 Path Racer Overhaul - Bicycle Complete
Front Wheel from Miyata 914

1985 Miyata 610 Path Racer Overhaul - Bicycle Complete
Handlebars

1985 Miyata 610 Path Racer Overhaul - Bicycle Complete
Drive Train
Thanks for looking,
John Z.

3 comments:

  1. Amazing. Well done. I love those brakes.

    ReplyDelete
  2. It also ride good! Thanks again john

    ReplyDelete
  3. what a cool end product it does look ready to fly down a path!

    ReplyDelete